2016 Polaris Phoenix 200 Owners Manual - Page 63

2016 Polaris Phoenix 200 Manual

Get 2016 Polaris Phoenix 200 PDF manuals and user guides View all 2016 Polaris Phoenix 200 manuals

Page 63 highlights

MAINTENANCE Oil and Filter Change 8. Place towels under the oil filter. Using an oil filter wrench, turn the filter counterclockwise to remove it. 9. Using a clean, dry cloth, clean the filter sealing surface on the crankcase. 10. Lubricate the gasket on the new filter with a film of engine oil. Check to make sure the gasket is in good condition. 11. Install the new filter and turn by hand until the filter gasket contacts the sealing surface, then turn and additional 1/2 turn. 12. Remove the oil fill plug and add the recommended oil. Do not overfill. 13. Reinstall the fill plug. 14. Start the engine and let it idle for one to two minutes. 15. Stop the engine and inspect for leaks. 16. Check the oil level and add oil as necessary to maintain the level at the center of the sight glass. 17. Discard used oil and filter properly. 59

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
59
MAINTENANCE
Oil and Filter Change
8.
Place towels under the oil
filter. Using an oil filter
wrench, turn the filter counter-
clockwise to remove it.
9.
Using a clean, dry cloth, clean
the filter sealing surface on
the crankcase.
10.
Lubricate the gasket on the
new filter with a film of
engine oil. Check to make
sure the gasket is in good
condition.
11.
Install the new filter and turn
by hand until the filter gasket
contacts the sealing surface,
then turn and additional 1/2
turn.
12.
Remove the oil fill plug and add the recommended oil. Do not
overfill.
13.
Reinstall the fill plug.
14.
Start the engine and let it idle for one to two minutes.
15.
Stop the engine and inspect for leaks.
16.
Check the oil level and add oil as necessary to maintain the level at
the center of the sight glass.
17.
Discard used oil and filter properly.