2016 Polaris Phoenix 200 Owners Manual - Page 76
2016 Polaris Phoenix 200 Manual
Page 76 highlights
MAINTENANCE Vehicle Immersion If your vehicle becomes immersed, major engine damage can result if the machine is not thoroughly inspected. Take the vehicle in for service before starting the engine. Your POLARIS dealer can provide this service. If it's impossible to take your ATV in for service before starting it, follow the steps outlined below. 1. Move the ATV to dry land or at the very least, to water below the footrests. 2. Turn the fuel valve off. 3. Check the air box and dry any water. 4. Remove the spark plug. 5. Loosen the carburetor drain screw and drain the carburetor. 6. Turn the engine over several times using the electric start. 7. Dry the spark plug. Reinstall the plug or install a new plug. 8. Tighten the carburetor drain screw. Drain 9. Turn the fuel valve on. Screw 10. Attempt to start the engine. If necessary, repeat the drying procedure. 11. Take the vehicle in for service as soon as possible, whether you succeed in starting it or not. Your POLARIS dealer can provide the required service. 12. If water has been ingested into the transmission, follow the procedure on page 74 for drying. 72