2016 Polaris Vegas 8-Ball Owners Manual - Page 77
2016 Polaris Vegas 8-Ball Manual
Page 77 highlights
Maintenance Battery Battery Installation 1. Before installing the battery, make sure it's fully charged and clean. 2. Slide the battery into position in the battery tray with the positive (+) terminal to the rear of the motorcycle. NOTICE: Connecting the battery cables to the wrong terminals can severely damage the electrical system. 3. Connect the positive (+) battery cables, tighten securely and install the red boot. 4. Connect the negative (-) cables and tighten securely. Be sure cables have adequate side cover clearance. 5. Reinstall the battery cover. 6. Reinstall the side cover. Fuse Replacement 1. Remove the right side cover. 2. Lift the release tab and slide the fuse box rearward to remove it from the bracket. Release the tabs on each side of the fuse box cover and remove the cover. 3. Remove the damaged fuse and seat the new fuse firmly in its place. 4. Reinstall the fuse box cover with the double cutout toward the front of the motorcycle. 5. Reinstall the fuse box and side cover. NOTICE: Use fuses with the recommended amperage to avoid damage to the electrical system. Release Tab Fuse Recommendations Engine / ECM Fuel Pump Headlamp / Brake Lamp Tail Lamp, Flashers, Indicator Lamp, Horn Ignition / Gauges Accessory Fuse (for emergency use) (motorcycle will operate without fuse) 15 amp 10 amp 20 amp 15 amp 15 amp 15 amp 75