2003 Pontiac Vibe Owner's Manual - Page 101

Headlamp High/Low Beam Changer The headlamps must be on for this feature to work. For high beams, push the turn signal lever away from you. When the high beams are on, this light on the instrument panel cluster also will be on. Windshield Wipers It will go off when you switch to the low beams. To switch back to low beams, pull the lever toward you. The lever on the right side of the steering column controls the windshield wipers and washer. The available positions are the following: OFF: The wipers are off. INT (Intermittent): Move the lever to INT to choose a delayed wiping cycle. In light rain or snow, you might want to use this position rather than continuous wiping. You can change the time between wipes by turning the INT TIME band. Turn the band forward or rearward for longer or shorter delay interval. This position works the same for the rear wiper. Flash-to-Pass With the lever in the low-beam position, pull the lever toward you to momentarily switch to high beams (to signal that you are going to pass). If you have the headlamps on when you release the lever, they will return to the low beams. 2-37