2003 Pontiac Vibe Owner's Manual - Page 149

Setting Preset Stations The six numbered pushbuttons let you return to your favorite stations. You can set up to 18 stations (six AM, six FM1 and six FM2) by performing the following steps: 1. Turn the radio on. 2. Press AM FM to select AM, FM1 or FM2. 3. Tune in the desired station. 4. Press EQ to select the equalization. 5. Press and hold one of the six numbered pushbuttons until you hear a beep. Whenever you press that numbered pushbutton, the station you set will return and the equalization that you selected will also be automatically selected for that pushbutton. 6. Repeat the steps for each pushbutton. Setting the Tone (Bass/Treble) TONE: Press and release this button until BASS, MID or TREB appears on the display. The SELECT LED indicator will light to show that the tone control can be adjusted. Turn the SELECT knob to increase or to decrease. If a station is weak or noisy, you may want to decrease the treble. To adjust all of the tone controls to the middle position, press and hold TONE until FLAT appears on the display. EQ (Equalizer): Press this button to select customized bass, mid and treble equalization settings. You can set up to six customized equalization settings by performing the following steps: 1. Turn the radio on. 2. Use the TONE button and the SELECT knob to create the desired equalization. 3. Press and hold the EQ button for two seconds. SELECT EQ # will appear on the display and the EQ symbol will flash. 4. Press EQ or turn the SELECT knob to select the desired EQ number. 5. Press and hold the EQ button or push the SELECT knob to store the equalization setting and the number. You will hear a beep and EQ SAVED will appear on the display. 6. Repeat the steps for the other EQ settings and numbers. EQ 5 has been programmed at the factory for use with talk radio, but it can be preset to a different tone. 3-9