2002 Saab 9-3 Owner's Manual - Page 70

70 Instruments and controls Setting the date 1 Use to select TEMP/DATE. 2 Press the SET button for at least one second (year starts to flash and a chime sounds). 3 4 5 6 7 8 Set the year using or . Touch SET. Set the month in the same way. Touch SET. Set the day in the same way. Press SET to save the date setting. Entering values for the functions Values can be entered for the following functions: SPD ∅ (SPEED AVERAGE), DIST, ARRIV, ALARM and SPD W. 1 Select the desired function using . 2 Press the SET button for at least one second (figures start to flash and a chime sounds). 3 Use or to increase or decrease the value (press CLR to reset). 4 Press SET to record the value. or Turning the Alarm and Speed warning on or off 1 Select the Alarm or Speed-warning function. 2 Press SET to turn on the function. Press CLR to turn off the function. When either function is on, an asterisk * will be visible on the far right of the display. The function will be visible even if another function has been selected. The Alarm and Speed-warning settings will not be cancelled when the engine is switched off. When the Alarm has been set to come on at a specified time, it will only be activated once - it will not come on at the same time every day. Press SET to turn it on again. The Alarm will continue to beep for one minute if not switched off. Average fuel consumption The average fuel consumption is calculated using the values for fuel consumed and distance driven since last reset. This value is stored in the car's trip computer even when the engine is switched off. • Select FUEL Ø with . To reset the value, press the CLEAR button for 4 seconds. A chime will be heard and CLEARED will be displayed.