2002 Saab 9-3 Owner's Manual - Page 98

98 Saab 9-3 Audio System Radio Press the RADIO button to switch to the radio when another source is active. Preset station buttons (1) Press once (release within a second) to select a preset station, e.g. The small figure on the far right of the display is the number of the preset button selected. Presetting a station Press the desired button and hold it down for more than a second to store the currently tuned station. During this time, the radio will be mute. The sound will return as soon as the station has been stored. Seeking (2) Automatic seek tuning: Press briefly to search for higher frequencies or for lower frequencies. Manual tuning: To switch to the manual-tuning function, press or and hold until a chime sounds and the M indicator appears on the display. The function will revert to automatic seek tuning two seconds after the last manual frequency change has been made. AS, Autostore (4) The autostore mode provides an additional preset function that can be used to search for and to store stations when you are in an area where you are unfamiliar with the stations and their frequencies. This can be done without changing your normal presets. Touch the AS button to switch the Autostore mode ON/OFF. When the Autostore mode is ON, the AS indicator will show at the bottom of the display. Press and hold the AS button for more than a second to initiate an automatic search for the six strongest stations. Each time the system finds and stores a station, the number on the far right of the SID display will change. If the system cannot Band selector (3) Touch the BAND button repeatedly to move through the waveband selections: FM1, FM2 and AM. IB1836