2007 Saturn Outlook Owner's Manual - Page 23
2007 Saturn Outlook Manual
Page 23 highlights
4. Make sure the safety belt is not twisted, and reconnect the center safety belt mini-latch to the mini-buckle. 5. Pull on the safety belt to be sure the mini-latch is secure. Installing the Third row Seats 1. Make sure the seatback is folded forward before installing the seat. See Folding the Seatback earlier in this section. The seats must be placed in the proper locations for the legs to attach correctly. The wider seat must be installed on the driver side and the narrower seat on the passenger side. Make sure to remove the bolts from the holes in the floor before installing the seats. 2. Place the seat on the vehicle floor so that the front seat hooks are on the vehicle bars. 3. Reinstall the bolts, and torque to 55 Y (41 lb ft). Pull up on the seat to make sure it is locked in place. 4. Raise the seatback to its upright position. Push and pull on the seatback to make sure it is locked into place. 5. Push the headrest up into position. Push and pull on the headrest to make sure it is locked into place. Removing the Third Row Seats 1. Remove the cargo management system, if it is in the vehicle. See Cargo Management System on page 164. 2. Make sure there is nothing on or under the seat. Notice: Folding a rear seat with the safety belts still fastened may cause damage to the seat or the safety belts. Always unbuckle the safety belts and return them to their normal stowed position before folding a rear seat. 3. Fold the seatback down. See Folding the Seatback earlier in this section. 4. Remove the rear bolts located on the floor on each side of the seat. 5. Remove the seat by tilting it slightly upward, and then pulling it out of the rear of the vehicle in one motion. 6. Put the bolts back into the holes on the floor so they do not get misplaced. 23