2009 Suzuki SX4 Owner's Manual - Page 67

Ignition Switch: 8 STEERING COLUMN CONTROLS Vehicle With Keyless Start System (3) (2) (4) (1) EXAMPLE 60A300S 80J037 80JC010 ACC Accessories such as the radio can operate, but the engine is off. ON This is the normal operating position. All electrical systems are on. START This is the position for starting the engine using the starter motor. The key should be released from this position as soon as the engine starts. Ignition key reminder A buzzer sounds intermittently to remind you to remove the ignition key if it is in the ignition switch when the driver's door is opened. The ignition switch can be operated without using an ignition key when the remote controller is in an area of the vehicle other than the rear luggage area. To turn the ignition switch, first push in the switch. • Manual transaxle vehicle You must push in the ignition switch to turn it from the "LOCK" position to the "ACC" position. To return to the "LOCK" position from the "ACC" position, turn the ignition switch counterclockwise while pushing in the switch. • Automatic transaxle vehicle To turn the ignition switch, push the switch. If the keyless start system blue indicator light illuminates on the instrument cluster, you can turn the ignition switch. If the red indicator light illuminates, you can not turn the ignition switch. NOTE: • The ignition switch can be turned to the "ACC" position when the keyless start system blue indicator light illuminates. The blue indicator light will illuminate for several seconds when you push in the ignition switch and then will turn off to protect the system. In this case, you must release the ignition switch and push it in again to illuminate the blue indicator light. 3-2 80J22-03E