2009 Volvo S40 Owner's Manual - Page 227

09 Maintenance and servicing Replacing bulbs 6. Insert a new bulb by turning it clockwise (the profile on the bulb holder will correspond with the profile in the base of the bulb). 7. Reinsert the bulb holder. The mark TOP should be upward. 2. Remove the covers in the left/right panels to access the bulb holders. 3. Disconnect the wiring connector from the affected bulb holder. 4. Press the catches together and pull out the bulb holder. 5. Replace the defective bulb. 6. Press the bulb holder into place and reinstall the cover. Back-up light Brake light (LED)1 Taillight Parking light Fog light (driver's side only) Turn signal 09 Removing the taillight bulb holder NOTE If the message indicating a burned out bulb remains in the information display after the bulb has been replaced, consult a trained and qualified Volvo service technician. Location of taillight bulbs High-level brake light These bulbs should only be replaced by a trained and qualified Volvo service technician. G020916 1. Switch off all lights and turn the key to position 0. Location of taillight bulbs 1 The wiring to the LED brake lights is permanently connected to the bulb holder. It should not be removed. G018055 All bulbs in the taillight cluster can be replaced from the trunk. To access the bulb holders: 227