2009 Volvo S40 Owner's Manual - Page 228

2009 Volvo S40 Manual

Page 228 highlights

09 Maintenance and servicing 09 Replacing bulbs License plate lighting Footwell lighting Trunk lighting G014843 G020795 1. Switch off all lights and turn the key to position 0. 2. Remove the screws with a screw driver. 3. Detach the entire bulb housing and carefully pull it out. Turn the connector counterclockwise and pull out the bulb. 4. Replace the defective bulb. 5. Reinstall the connector and turn it clockwise. 6. Reinstall the entire bulb housing and screw it into place. The footwell lighting is located under the dashboard on the driver's and passenger's sides. To replace a bulb: 1. Insert a screwdriver under the edge of the lens. Turn the screwdriver gently to detach the lens. 2. Remove the defective bulb. 3. Install a new bulb. 4. Press the lens back into place. 1. Insert a screwdriver and turn it gently to detach the bulb housing. 2. Remove the defective bulb. 3. Install a new bulb. 4. Press the bulb housing back into place. 228 G020915

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286

09 Maintenance and servicing
Replacing bulbs
09
228
License plate lighting
G014843
1.
Switch off all lights and turn the key to
position
0
.
2.
Remove the screws with a screw driver.
3.
Detach the entire bulb housing and care-
fully pull it out. Turn the connector coun-
terclockwise and pull out the bulb.
4.
Replace the defective bulb.
5.
Reinstall the connector and turn it clock-
wise.
6.
Reinstall the entire bulb housing and screw
it into place.
Footwell lighting
G020795
The footwell lighting is located under the dash-
board on the driver's and passenger's sides.
To replace a bulb:
1.
Insert a screwdriver under the edge of the
lens. Turn the screwdriver gently to detach
the lens.
2.
Remove the defective bulb.
3.
Install a new bulb.
4.
Press the lens back into place.
Trunk lighting
G020915
1.
Insert a screwdriver and turn it gently to
detach the bulb housing.
2.
Remove the defective bulb.
3.
Install a new bulb.
4.
Press the bulb housing back into place.