2009 Volvo S60 Owner's Manual - Page 169
2009 Volvo S60 Manual
Page 169 highlights
07 Wheels and tires Changing wheels CAUTION • The vehicle must not be driven with wheels of different dimensions or with a spare tire other than the one that came with the vehicle. The use of different size wheels can seriously damage your vehicle's transmission. Correct tightening torque on wheel bolts must be observed. The wheel bolts should never be greased or lubricated. The extended, chromed wheel bolts must not be used with steel rims, as they make it impossible to fit the hub caps. Locking wheel bolts can be used on both aluminum and steel wheels. If hub caps are used on steel wheels, the locking wheel bolt should be mounted in the hole as far from the tire's inflation valve as possible. It would otherwise not be possible to mount the hub cap on the wheel. 07 • G020331 Insert flat end of lug wrench and turn/pull straight out Loosen the wheel bolts G020332 • The spare wheel is located under the carpet on the trunk floor. The jack and crank are secured in the wheel recess. There are two jack attachment points on each side of the vehicle (see illustration below). 3. Remove the wheel cap (where applicable) using the lug wrench in the tool bag. 4. With the vehicle still on the ground, use the lug wrench to loosen the wheel bolts 1/2 1 turn by exerting downward pressure. Turn the bolts counterclockwise to loosen. To change a wheel: 1. Engage the parking brake. 2. Put the gear selector in P (automatic transmission) or reverse (manual transmission). 169