2009 Volvo S60 Owner's Manual - Page 201

2009 Volvo S60 Manual

Page 201 highlights

09 Maintenance and servicing Replacing bulbs Turn signal, driver's side Turn signal, passenger's side 3. Press the filler pipe (3) back into position. 4. Press the vent hose (4) into place on the filler pipe. 5. Reinstall and tighten the filler pipe screw (2). 6. Reinstall the radiator pipe to the box (1). 09 Side marker light G028438 Removing the defective bulb: 1. Switch off the headlights and turn the ignition switch to position 0. 2. Pull out the bulb holder by twisting it counterclockwise. 3. Remove the bulb from the holder by pressing it in and turning it counterclockwise. 1. Switch off the headlights and turn the ignition switch to position 0. 2. Remove radiator pipe (1) from the box. 3. Remove filler pipe screw (2). 4. Pull the filler pipe (3) straight up. 5. Remove vent hose (4) from filler pipe. G028439 G027283 Installing the new bulb: 1. Insert the new bulb into the holder by pressing it in and turning it clockwise. 2. Reinsert the bulb holder in the headlight housing and twist it clockwise until it seats properly. Installing the new bulb: 1. Replace the bulb (same procedure as the driver's side bulb). 2. Ensure that the seal between the washer fluid reservoir and the filler pipe is correctly positioned. Side marker light 1. Turn the lamp holder counterclockwise and pull it out. 2. Pull out the defective bulb and insert a new one. 201

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254

09 Maintenance and servicing
Replacing bulbs
09
``
201
Turn signal, driver's side
G028438
Removing the defective bulb:
1.
Switch off the headlights and turn the igni-
tion switch to position
0
.
2.
Pull out the bulb holder by twisting it coun-
terclockwise.
3.
Remove the bulb from the holder by press-
ing it in and turning it counterclockwise.
Installing the new bulb:
1.
Insert the new bulb into the holder by
pressing it in and turning it clockwise.
2.
Reinsert the bulb holder in the headlight
housing and twist it clockwise until it seats
properly.
Turn signal, passenger's side
G027283
1.
Switch off the headlights and turn the igni-
tion switch to position
0
.
2.
Remove radiator pipe (1) from the box.
3.
Remove filler pipe screw (2).
4.
Pull the filler pipe (3) straight up.
5.
Remove vent hose (4) from filler pipe.
Installing the new bulb:
1.
Replace the bulb (same procedure as the
driver's side bulb).
2.
Ensure that the seal between the washer
fluid reservoir and the filler pipe is correctly
positioned.
3.
Press the filler pipe (3) back into position.
4.
Press the vent hose (4) into place on the
filler pipe.
5.
Reinstall and tighten the filler pipe screw
(2).
6.
Reinstall the radiator pipe to the box (1).
Side marker light
G028439
Side marker light
1.
Turn the lamp holder counterclockwise
and pull it out.
2.
Pull out the defective bulb and insert a new
one.