2009 Volvo S60 Owner's Manual - Page 170
2009 Volvo S60 Manual
Page 170 highlights
07 Wheels and tires Changing wheels 3. Install the wheel bolts and tighten handtight. Using the lug wrench, tighten crosswise until all bolts are snug. 4. Lower the vehicle to the ground and alternately tighten the bolts crosswise to 102 ft. lbs. (140 Nm). 5. Install the wheel cap (where applicable). G027324 Attaching the jack Jack on certain models 1. Position the jack correctly on the bar in the attachment (see illustration) and crank while simultaneously guiding the base of the jack to the ground. The base of the jack must be flat on a level, firm, non-slippery surface. Before raising the vehicle, check that the jack is still correctly positioned in the attachment. 07 NOTE To avoid excessive wear and the necessity of rebalancing, mark and reinstall wheels in the same location and position as before removal. To lessen the chance of imbalance, each wheel hub is equipped with a guide stud to ensure that a removed wheel can be reinstalled in its original position (as when changing over to winter tires/wheels). 2. Raise the vehicle until the wheel to be changed is lifted off the ground. 3. Unscrew the wheel bolts completely and carefully remove the wheel so as not to damage the threads on the studs. Installing the wheel 1. Clean the contact surfaces on the wheel and hub. 2. Lift the wheel and place it on the hub. 170 G027309