2011 Volvo S60 Owner's Manual - Page 294

08 Maintenance and specifications Replacing bulbs Introduction All bulb specifications are listed on page 299. The following bulbs should only be replaced by a trained and qualified Volvo service technician: Headlight housing WARNING • • The engine should not be running when changing bulbs. If the engine has been running just prior to replacing bulbs in the headlight housing, please keep in mind that components in the engine compartment will be hot. Dome lighting Reading lights Glove compartment lighting Footwell lighting Turn signals in the door mirrors Approach lighting in the door mirrors Active Bending Lights and LED bulbs The entire headlight housing must be lifted out when replacing all front bulbs. CAUTION Never touch the glass of bulbs with your fingers. Grease and oils from your fingers vaporize in the heat and will leave a deposit on the reflector, which will damage it. NOTE For information regarding any other bulbs not mentioned in this section, please contact your Volvo retailer or a trained and authorized Volvo service technician. NOTE WARNING • • Always switch off the ignition before starting to replace a bulb. The optional Active Bending Light bulbs contain trace amounts of mercury. These bulbs should always be disposed of by a trained and qualified Volvo service technician. • Active Bending Lights* - due to the high voltage used by these headlights, these bulbs should only be replaced by a trained and qualified Volvo service technician. Turn off the lights and remove the remote key from the ignition before changing any bulbs. 08 • 294 * Option/accessory, for more information, see Introduction.