2011 Volvo S60 Owner's Manual - Page 81
2011 Volvo S60 Manual
Page 81 highlights
03 Your driving environment Ignition modes Inserting and removing the remote key Ignition modes The various ignition modes are accessed with the remote key in the ignition slot. Ignition mode 0 ± Insert the remote key in the ignition slot and press it in as far as possible. Position 0 Function Odometer, clock and temperature gauge are illuminated. Steering lock is deactivated. The audio system can be used. Moonroof*, power windows,12volt sockets, navigation system*, climate system blower, ECC, windshield wipers can be used. The headlights come on. Warning/indicator lights come on for 5 seconds. All equipment operates apart from heated seats and rear window defroster, which only work when the engine is running. The starter motor will operate until the engine has started. WARNING The ignition key should always be fully inserted in the ignition slot when the vehicle is being towed to help prevent the steering wheel from locking. On vehicles with the optional keyless drive, the remote key must be in the passenger compartment and the driver's door must be closed. 03 I Ignition slot with remote key inserted and START/ STOP ENGINE button. Ignition mode I ± With the remote key fully pressed into the ignition slot, press START/STOP ENGINE briefly. With the remote key fully pressed into the ignition slot, press START/STOP ENGINE for approximately 2 seconds. Inserting the remote key Holding the end of the remote key with the base of the key blade, insert the remote key into the ignition slot as shown in the illustration and press it in as far as possible (past the detent). II Ignition mode II ± CAUTION Foreign objects in the ignition slot can impair function or damage the lock. III Ignition mode III (engine start) Start the engine, see page 108. Removing the remote key The remote key can be removed from the ignition slot by pulling it out. The gear selector must be in position P (Park). NOTE The brake pedal must not be depressed when accessing ignition modes I or II. Stopping the engine ± Press START/STOP ENGINE. (If the engine is running and the vehicle is moving, keep the button depressed until the engine stops). `` * Option/accessory, for more information, see Introduction. 81