2011 Volvo S60 Owner's Manual - Page 91

03 Your driving environment Lighting NOTE ABL is activated automatically1 when the engine is started and it can be deactivated/ reactivated in the menu system under MY CAR Settings Car settings Light settings Active bending lights. Symbol Display Headlamp failure Service required • • The use of daytime running lights is mandatory in Canada. Continuous high beams cannot be activated when the headlight switch is in position or 0. High beam flash will function in these positions. Explanation The system is not functioning properly and should be inspected/ repaired by a trained and qualified Volvo service technician. NOTE This function is only active in twilight or dark conditions, and only when the vehicle is in motion. 03 Active Bending Lights (ABL)* If a fault should occur in the system, the symbol will illuminate and a message will be displayed as shown in the table. Headlight pattern with the Active Bending Light function deactivated (left) and activated (right) When this function is activated, the headlight beams adjust laterally to help light up a curve according to movements of the steering wheel (see the right-pointing beam in the illustration). 1 The factory default setting is on. `` * Option/accessory, for more information, see Introduction. 91