2005 Yamaha Motorsports V Star 1100 Classic Owners Manual - Page 28

2005 Yamaha Motorsports V Star 1100 Classic Manual

Page 28 highlights

INSTRUMENT AND CONTROL FUNCTIONS EAU14871 Adjusting the shock absorber assembly The shock absorber assembly is located under the rider seat and is equipped with a spring preload adjusting ring. ECA10100 CAUTION: 3 1. Storage compartment lock 1. Storage compartment cover Never attempt to turn an adjusting mechanism beyond the maximum or minimum settings. Adjust the spring preload as follows. 1. Remove the rider seat. (See page 3-9.) 2. Remove each quick fastener from the ignitor unit panel by pushing the center in with a screwdriver, then pulling the fastener out. 2. Pull the storage compartment cover out as shown. 2. Turn the key counterclockwise, remove it, and then close the lock cover. 1. Storage compartment cover To close the storage compartment 1. Place the storage compartment cover in its original position as shown. 3-11 1. Quick fastener

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93

INSTRUMENT AND CONTROL FUNCTIONS
3-11
3
2.
Pull the storage compartment cov-
er out as shown.
To close the storage compartment
1. Place the storage compartment
cover in its original position as
shown.
2.
Turn the key counterclockwise, re-
move it, and then close the lock
cover.
EAU14871
Adjusting the shock absorber
assembly
The shock absorber assembly is locat-
ed under the rider seat and is equipped
with a spring preload adjusting ring.
CAUTION:
ECA10100
Never attempt to turn an adjusting
mechanism beyond the maximum or
minimum settings.
Adjust the spring preload as follows.
1.
Remove the rider seat. (See page
3-9.)
2.
Remove each quick fastener from
the ignitor unit panel by pushing
the center in with a screwdriver,
then pulling the fastener out.
1.
Storage compartment lock
1.
Storage compartment cover
1.
Storage compartment cover
1.
Quick fastener