2005 Yamaha Motorsports V Star 1100 Classic Owners Manual - Page 69

2005 Yamaha Motorsports V Star 1100 Classic Manual

Page 69 highlights

PERIODIC MAINTENANCE AND MINOR REPAIR Specified fuses: Main fuse: 30.0 A Backup fuse: 5.0 A Ignition fuse: 10.0 A Headlight fuse: 15.0 A Carburetor heater fuse: 15.0 A Signaling system fuse: 10.0 A Ignitor unit fuse: XVS1100AW 5.0 A (CAL) XVS1100AT 5.0 A (CAL) ECA10640 8. Install the storage compartment cover. 9. Place the ignitor unit panel in the original position and install the quick fasteners. NOTE: To install a quick fastener, push its pin back so that it will protrude from the fastener head, then insert the fastener and push the protruding pin in until it is flush with the fastener head. 1. Ignitor unit panel 2. Spare main fuse 3. Main fuse 4. Turn the key to "OFF" and turn off the electrical circuit in question. 5. Remove the blown fuse, and then install a new fuse of the specified amperage. CAUTION: Do not use a fuse of a higher amperage rating than recommended to avoid causing extensive damage to the electrical system and possibly a fire. 6. Turn the key to "ON" and turn on the electrical circuit in question to check if the device operates. 7. If the fuse immediately blows again, have a Yamaha dealer check the electrical system. 6-29 1. Quick fastener (after removal) 2. Quick fastener (before installation) 6 10. Install the rider seat.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93

PERIODIC MAINTENANCE AND MINOR REPAIR
6-29
6
4.
Turn the key to “OFF” and turn off
the electrical circuit in question.
5.
Remove the blown fuse, and then
install a new fuse of the specified
amperage.
CAUTION:
ECA10640
Do not use a fuse of a higher amper-
age rating than recommended to
avoid causing extensive damage to
the electrical system and possibly a
fire.
6.
Turn the key to “ON” and turn on
the electrical circuit in question to
check if the device operates.
7. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
8. Install the storage compartment
cover.
9.
Place the ignitor unit panel in the
original position and install the
quick fasteners.
NOTE:
To install a quick fastener, push its pin
back so that it will protrude from the fas-
tener head, then insert the fastener and
push the protruding pin in until it is flush
with the fastener head.
10.
Install the rider seat.
1.
Ignitor unit panel
2.
Spare main fuse
3.
Main fuse
Specified fuses:
Main fuse:
30.0 A
Backup fuse:
5.0 A
Ignition fuse:
10.0 A
Headlight fuse:
15.0 A
Carburetor heater fuse:
15.0 A
Signaling system fuse:
10.0 A
Ignitor unit fuse:
XVS1100AW 5.0 A (CAL)
XVS1100AT 5.0 A (CAL)
1.
Quick fastener (after removal)
2.
Quick fastener (before installation)