2005 Yamaha Motorsports V Star 1100 Classic Owners Manual - Page 51

2005 Yamaha Motorsports V Star 1100 Classic Manual

Get 2005 Yamaha Motorsports V Star 1100 Classic PDF manuals and user guides View all 2005 Yamaha Motorsports V Star 1100 Classic manuals

Page 51 highlights

PERIODIC MAINTENANCE AND MINOR REPAIR NOTE: The engine oil should be between the minimum and maximum level marks. 3. Remove the engine oil filler cap and drain bolt to drain the oil from the crankcase. NOTE: Check the washer for damage and replace it if necessary. Tightening torque: Engine oil drain bolt: 43 Nm (4.3 m·kgf, 31 ft·lbf) 5. Add the specified amount of the recommended engine oil, and then install and tighten the oil filler cap. 1. Engine oil filler cap 1. Engine oil level check window 2. Maximum level mark 3. Minimum level mark Recommended engine oil: See page 8-1. Oil change quantity: 3.00 L (3.17 US qt) (2.64 Imp.qt) ECA11620 6 4. If the engine oil is at or below the minimum level mark, add sufficient oil of the recommended type to raise it to the correct level. To change the engine oil 1. Start the engine, warm it up for several minutes, and then turn it off. 2. Place an oil pan under the engine to collect the used oil. CAUTION: G 1. Engine oil drain bolt 4. Install the engine oil drain bolt, and then tighten it to the specified torque. 6-11 In order to prevent clutch slippage (since the engine oil also lubricates the clutch), do not mix any chemical additives. Do not use oils with a diesel specification of "CD" or oils of a higher quality than specified. In addition, do not use oils labeled "ENERGY CONSERVING II" or higher.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
PERIODIC MAINTENANCE AND MINOR REPAIR
6-11
6
NOTE:
The engine oil should be between the
minimum and maximum level marks.
4.
If the engine oil is at or below the
minimum level mark, add sufficient
oil of the recommended type to
raise it to the correct level.
To change the engine oil
1. Start the engine, warm it up for
several minutes, and then turn it
off.
2.
Place an oil pan under the engine
to collect the used oil.
3. Remove the engine oil filler cap
and drain bolt to drain the oil from
the crankcase.
4.
Install the engine oil drain bolt, and
then tighten it to the specified
torque.
NOTE:
Check the washer for damage and re-
place it if necessary.
5. Add the specified amount of the
recommended engine oil, and then
install and tighten the oil filler cap.
CAUTION:
ECA11620
●
In order to prevent clutch slip-
page (since the engine oil also
lubricates the clutch), do not
mix any chemical additives. Do
not use oils with a diesel speci-
fication of “CD” or oils of a high-
er quality than specified. In
addition, do not use oils labeled
“ENERGY CONSERVING II” or
higher.
1.
Engine oil level check window
2.
Maximum level mark
3.
Minimum level mark
1.
Engine oil filler cap
1.
Engine oil drain bolt
Tightening torque:
Engine oil drain bolt:
43 Nm (4.3 m·kgf, 31 ft·lbf)
Recommended engine oil:
See page 8-1.
Oil change quantity:
3.00 L (3.17 US qt) (2.64 Imp.qt)