2011 Yamaha Motorsports RS Venture GT Owners Manual - Page 97
2011 Yamaha Motorsports RS Venture GT Manual
Page 97 highlights
Periodic maintenance and adjustment RS90GT / RS90LTGT / RST90GT RST90 1 1. Left lower cover 1. Dipstick 14. Install the drive guard, and then install the left side cover and the shroud (RS90GT / RS90LTGT / RST90GT), or close the shroud (RST90). ESU13922 4. Drive chain housing To check the drive chain housing oil level 1. Place the snowmobile on a level surface and apply the parking brake. 2. Remove the shroud and the right side cover (RS90GT / RS90LTGT / RST90GT), or open the shroud (RST90). [See page 63 (RS90GT / RS90LTGT / RST90GT) or page 67 (RST90) for the procedures.] 3. Remove the dipstick, wipe it off with a clean rag, and then insert it back into the filler hole. RS90GT / RS90LTGT / RST90GT Remove the dipstick and check that the oil is between the maximum and minimum level marks on the "REVERSE" side of the dipstick. If the oil is below the minimum level mark, add sufficient oil of the recommended type to raise it to the maximum level mark. NOTICE: Make sure that no foreign material enters the drive chain housing. [ECS00531] 1. Maximum level mark 2. Minimum level mark 1 1. Dipstick 91