2011 Yamaha Motorsports RS Venture GT Owners Manual - Page 99
2011 Yamaha Motorsports RS Venture GT Manual
Page 99 highlights
Periodic maintenance and adjustment Test the brake at a low speed when starting out to make sure that it is working properly. If the brake does not provide proper braking performance, inspect the brake for wear or brake fluid leakage. (See the following section for more details.) RST90 / RST90GT Checking the brake pads Check the brake pads for wear according to the following procedure. 1. Place the snowmobile on a level surface and apply the parking brake. 2. Remove the shroud and the right side cover (RS90GT / RS90LTGT / RST90GT), or open the shroud (RST90). [See page 63 (RS90GT / RS90LTGT / RST90GT) or page 67 (RST90) for the procedures.] 3. Check the brake pads for wear. If the brake pads reach the wear limit, ask a Yamaha dealer to replace them. RS90GT / RS90LTGT 1. Brake pad wear limit Brake pad wear limit: RS90GT 4.7 mm (0.19 in) RS90LTGT 4.7 mm (0.19 in) RST90 7.5 mm (0.30 in) RST90GT 7.5 mm (0.30 in) 4. Install the right side cover and the shroud (RS90GT / RS90LTGT / RST90GT), or close the shroud (RST90). Checking the parking brake pads Check the parking brake pads for wear according to the following procedure. 1. Remove the shroud and the right side cover (RS90GT / RS90LTGT / RST90GT), or open the shroud (RST90). [See page 63 (RS90GT / RS90LTGT / RST90GT) or page 67 (RST90) for the procedures.] 2. Check the parking brake pads for wear by measuring the thickness of the pads. If the parking brake pads reach the wear limit, ask a Yamaha dealer to replace them. 1. Brake pad wear limit 93