3Com 3C905-TX Installation Guide - Page 11

HP 10/100 3Com 3C905B-TX Network Interface Card Installation Guide Software Installation Procedure Checking the Driver Installation Checking the Network Settings 4 The 3Com Fast Etherlink XL 10/100Mb TX Ethernet NIC (3C905B-TX) driver files will be automatically found, click on Next to begin the driver installation. 5 If prompted to insert EtherDisk® diskette #1, type A:\ at the Copy Files From prompt and press ENTER. Similarly, insert EtherDisk® diskette #2 and press ENTER when prompted. 6 Follow the remaining onscreen instructions and enter the location of the Windows 98 files (CAB files) when prompted, then click on OK. On HP Windows 98 preloaded systems, the path is C:\WINDOWS\OPTIONS\CABS. 7 Click on Finish to complete the network component installation. 8 When prompted to reboot, remove your driver diskette and click on Yes. The software installation is complete. Confirming Installation To confirm that the network interface card driver is properly installed in a PC running Windows 95 or Windows 98: 1 Double-click on the My Computer icon, then double-click on the Control Panel icon. 2 Double-click on the System icon. The System Properties box appears. 3 Click on the Device Manager tab. A list of devices appears, arranged by type. 4 Finally, double-click on Network Adapters. The name of the installed network interface card appears: 3Com EtherLink XL Adapter (3C905B). If this name does not appear or if a yellow exclamation mark appears next to it, follow this troubleshooting procedure: a In the Device Manager window, double-click on Other Devices. b Click on PCI Ethernet Controller or the duplicate 3C905B-TX NIC entry. c Click on Remove. d Restart your PC. Follow these steps to confirm that your network setting are correct on a PC running Windows 95 or Windows 98: 1 In the Control Panel window, double-click on the Network icon. English 11