3Com 4500G Getting Started Guide - Page 20
Hapter, Ntroducing, Witch, Amily, Table 4 - pwr
UPC - 662705505534
View all 3Com 4500G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
20 CHAPTER 1: INTRODUCING THE SWITCH 4500G FAMILY Table 4 Description on the LEDs of the Switch 4500G PWR 24-Port& 48-Port Ethernet Switch (Continued) LED Label 10/100/1000 None BASE-T Ethernet port status LED Status Rate mode Duplex mode PoE mode Description Green The port works at the rate of 1000 Mbps; the LED blinks quickly when the port is sending or receiving data. Yellow The port works at the rate of 10/100 Mbps; the LED blinks quickly when the port is sending or receiving data. Yellow, POST fails on the port. blinking (3 Hz) OFF The port is not connected. Green The port works in full duplex mode; the LED blinks quickly when the port is sending or receiving data. Yellow The port works in half duplex mode; the LED blinks quickly when the port is sending or receiving data. Yellow, POST fails on the port. blinking (3 Hz) OFF The port is not connected. Green, ON The port supplies power normally Green, The required power of the blinking (1 Hz) attached devices has exceeded the maximum power that the port can supply. The total power that the switch supplies has reached the maximum power, so the port does not supply power any more. Yellow, ON The devices attached to the port are not powered devices (PDs), so the port does not supply power. The PoE power fails, so the port cannot supply power.