3M MP8747 Operation Guide - Page 29
Indicator Lights
View all 3M MP8747 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Section 7: Troubleshooting Indicator Lights POWER Indicator Light LAMP TEMP Indicator Light Indicator Light Meaning Lights orange Turns off Turns off Standby status Blinks green Turns off Turns off Warming up. Wait. Lights green. Turns off. Turns off. Operation status. Blinks orange. Turns off. Turns off. Cool down. Lights red. Lights red. Lights red. Blinks red. Lights red. Turns off. Lights red. Turns off. Turns off. Turns off. Blinks red. Lights red. The lamp does not light. Wait approx. 20 minutes before turning on power again. If indicator still lights, the lamp may have failed. Replace lamp. A lamp has not been inserted or the lamp cover is missing. Turn off projector, disconnect power and wait 45 minutes for projector and lamp to fully cool. Replace lamp and/or lamp cover door, then re-connect power and turn on projector again. The cooling fan is not operating. Switch power off, and wait for 20 minutes until the equipment cools. Check to see if air filter or ventilation openings are blocked. Clear any obstructions. Internal overheating.Turn off projector, disconnect power, and let cool for 20 minutes.Check to see if air filter or ventilation openings are blocked. Clear any obstructions. © 3M IPC 2000 3M™ Personal Projector MP8746/MP8747 29