3M X62 User Manual - Page 14
Connecting power supply, Firmly plug the power cord's plug into the outlet.
View all 3M X62 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
3M™ Digital Projector X62 Setting up Connecting power supply WARNING ŹPlease use extra caution when connecting the power cord, as LQFRUUHFWRUIDXOW\FRQQHFWLRQVPD\UHVXOWLQ¿UHDQGRUHOHFWULFDOVKRFN • Only use the power cord that came with the projector. If it is damaged, contact your dealer to newly get correct one. • Only plug the power cord into an outlet rated for use with the power cord's VSHFL¿HGYROWDJHUDQJH • Never modify the power cord. Never attempt to defeat the ground connection of the three-pronged plug. AC inlet Connector of the power cord 1. Connect the connector of the power cord to the AC inlet of the projector. 2. Firmly plug the power cord's plug into the outlet. 14 © 3M 2006. All Rights Reserved.
14
Connecting power supply
WARNING
Please use extra caution when connecting the power cord, as
• Only use the power cord that came with the projector. If it is damaged, contact
your dealer to newly get correct one.
• Only plug the power cord into an outlet rated for use with the power cord's
• Never modify the power cord. Never attempt to defeat the ground connection
of the three-pronged plug.
1.
Connect the connector of the power cord to the AC inlet of the projector.
2.
Firmly plug the power cord's plug into the outlet.
Setting up
AC inlet
Connector
of the power cord
3M™ Digital Projector X62
© 3M 2006.
All Rights Reserved.