3M X62 User Manual - Page 60
The lamp is approaching the end of its product, extremely low level.
![]() |
View all 3M X62 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
3M™ Digital Projector X62 Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Phenomenon Cases not involving a machine defect The brightness and/or contrast are adjusted to an extremely low level. Adjust BRIGHTNESS and/or CONTRAST settings to a higher level using the menu function. Reference page 25, 26 Pictures appear The WHISPER function is working. dark. Select NORMAL for the WHISPER item in the SETUP menu. 26, 35 The lamp is approaching the end of its product lifetime. Replace the lamp. 50, 51 Pictures appear blurry. Either the focus and/or horizontal phase settings are not properly adjusted. Adjust the focus using the focus ring, and/or H PHASE using the menu function. The lens is dirty or misty. Clean the lens referring to the section "Caring for the lens". 19, 30 54 NOTE • Although bright spots or dark spots may appear on the screen, this is a unique characteristic of liquid crystal displays, and it does not constitute or imply a machine defect. 60 © 3M 2006. All Rights Reserved.
![](/manual_guide/products/3m-x62-user-manual-482376d/60.png)