3Ware 7506-12 User Guide - Page 37
Exiting the 3ware BIOS tool, Determining your configuration, Alt-3, 3ware Disk Array Configuration
UPC - 693494756128
View all 3Ware 7506-12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Exiting the 3ware BIOS tool Figure 9. 3ware BIOS Tool Press Alt-3 immediately to bring up the 3ware Disk Array Configuration display. Note: If drives are attached and you do not want to install the 3ware BIOS, press Alt-b to bypass the BIOS installation. This is useful when booting temporarily from another device. Exiting the 3ware BIOS tool To save your configuration modifications press the F8 key. After you have pressed the F8 key to commit your changes, a list of affected drives will be displayed and you will be asked to confirm your configuration. The booting process will resume. To exit the 3ware Disk Array Configuration Utility without saving your changes press Esc. Determining your configuration Caution: Configuring a disk array or hot spare writes format-type data onto its member disks and overwrites all the files on those disks. Be sure to back up data that requires retention. ■ All supported RAID levels (0,1,5,10) can be created based on the number of drives that the ATA RAID Controller supports. ■ Multiple arrays of supported RAID levels can be implemented on a single controller based on the number of drives that the ATA RAID Controller supports. www.3ware.com 29