AEG AGN71800C0 Product Manual - Page 11

ENGLISH 11 Problem Possible cause Solution The mains plug is not con- Connect the mains plug to the nected to the mains socket mains socket correctly. correctly. There is no voltage in the mains socket. Connect a different electrical appliance to the mains socket. Contact a qualified electrician. The appliance is noisy. The appliance is not sup- Check if the appliance stands ported properly. stable. Audible or visual alarm is on. The cabinet has been recently switched on or the temperature is still too high. Refer to "Door Open Alarm"or "High Temperature Alarm". The temperature in the ap- Refer to "Door Open Alarm"or pliance is too high. "High Temperature Alarm". The door is left open. Close the door. The temperature in the ap- Contact a qualified electrician pliance is too high. or contact the nearest Author- ised Service Centre. A rectangular symbol is Temperature sensor prob- shown instead of numbers lem. on the Temperature Display. Contact the nearest Authorised Service Centre (the cooling system will continue to keep food products cold, but temperature adjustment will not be possible). The compressor operates continually. Temperature is set incor- Refer to "Operation" chapter. rectly. Many food products were Wait some hours and then put in at the same time. check the temperature again. The room temperature is Refer to climate class chart on too high. the rating plate. Food products placed in the appliance were too warm. Allow food products to cool to room temperature before storing. The door is not closed cor- Refer to "Closing the door". rectly. The FROSTMATIC function Refer to "FROSTMATIC func- is switched on. tion". There is too much frost and ice. The door is not closed cor- Refer to "Closing the door". rectly or the gasket is deformed/dirty.