AEG AGN71800C0 Product Manual - Page 7

3.4 Temperature regulation The default set temperature for the fridge is +5°C. Set the temperature of the fridge by pressing the temperature button. The temperature indicator shows the set temperature. The set temperature will be reached within 24 hours. After a power failure the set temperature remains stored. 3.5 MinuteMinder function The MinuteMinder function is to be used to set an acoustic alarm at the preferred time, useful for example when a recipe requires to cool down food products for a certain length of time. It is also useful when a reminder is needed in order not to forget the bottles placed in the freezer for fast cooling. 1. Press Mode until the corresponding icon appears. The MinuteMinder indicator flashes. The Timer shows the set value (30 minutes) for a few seconds. 2. Press the Temperature colder or Temperature warmer button to change the Timer set value from 1 to 90 minutes. 3. Press OK to confirm. The MinuteMinder indicator is shown. The Timer starts to flash (min). It is possible to change the time at any time during the countdown and at the end by pressing the Temperature colder button and the Temperature warmer button. At the end of the countdown, the MinuteMinder indicator flashes and an audible alarm sounds. Press OK to switch off the sound and terminate the function. It is possible to deactivate the function at any time during the countdown by repeating the function steps, until the indicator turns off. ENGLISH 7 3.6 ChildLock function Activate the ChildLock function to lock the buttons from unintentional operation. 1. Press Mode until the corresponding icon appears. The ChildLock indicator flashes. 2. Press OK to confirm. The ChildLock indicator is shown. To deactivate the ChildLock function, repeat the procedure until the ChildLock indicator goes off. 3.7 FROSTMATIC function The FROSTMATIC function accelerates the freezing of fresh food and, at the same time, protects foodstuffs already stored from undesirable warming. 1. Press Mode until the corresponding icon appears. The FROSTMATIC indicator flashes. 2. Press OK to confirm. The FROSTMATIC indicator is shown. The FROSTMATIC function shuts off automatically after 52 hours. To switch off the function before its automatic end, repeat the steps until the FROSTMATIC indicator goes off. The function switches off by selecting a different freezer set temperature. 3.8 High temperature alarm An increase in the temperature in the freezer compartment (for example due to an earlier power failure) is indicated by: • flashing of the alarm and freezer temperature indicators; • sounding of the buzzer. Press any button to reset the alarm. The buzzer switches off. The freezer temperature indicator shows the highest temperature reached for a few seconds. Then show again the set temperature. The alarm indicator continues to flash until the normal conditions are restored.