AEG BPE642020M User Manual - Page 17

The display shows flashing and the default set core temperature. The temperature is 60 °C for the first operation, and the last set value for each subsequent operation. When you put the core temperature sensor into the socket, you cancel the settings for the clock functions. 4. Touch or to set the core temperature. 5. Touch or the settings save automatically after 5 seconds. You can set the core temperature only when flashes. If is in the display but does not flash before you set the core temperature, touch and or to set a new value. 6. Set the oven function and the oven temperature. The display shows the current core temperature and the heat up symbol . While the appliance calculates the approximate duration time, the display shows the count up time. After the first calculation the display shows the approximate duration of the cooking time. The appliance continues to calculate the duration during the cooking. The display updates at intervals with the new duration value. ENGLISH 17 When you cook with the core temperature sensor, you can change the temperature shown in the display. After you put the core temperature sensor in the socket and set an oven function and temperature, the display shows the current core temperature. Touch again and again to see three other temperatures: • the set core temperature • the current oven temperature • the current core temperature. When the meat is at the set core temperature, an acoustic signal sounds for two minutes and the value of the core temperature and flash. The appliance deactivates. 7. Touch a sensor field to deactivate the acoustic signal. 8. Remove the core temperature sensor from the socket and remove the meat from the appliance. WARNING! Be careful when you remove the core temperature sensor. It is hot. There is a risk of burns. 9.2 Inserting the accessories Wire shelf: Push the shelf between the guide bars of the shelf support and make sure that the feet point down.