AEG BPE642020M User Manual - Page 39

Problem, Possible cause, Remedy

Get AEG BPE642020M PDF manuals and user guides View all AEG BPE642020M manuals
Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

ENGLISH 39 Problem Possible cause Remedy The oven does not heat up. The Child Lock is on. Refer to "Using the Child Lock". The oven does not heat up. The fuse is blown. Make sure that the fuse is the cause of the malfunction. If the fuse is blown again and again, contact a qualified electrician. The lamp does not operate. The lamp is defective. Replace the lamp. The display does not show the time during the off status. The display is deactivated. Touch and at the same time to activate the display again. The core temperature sensor The plug of the core tem- does not operate. perature sensor is not cor- rectly installed into the sock- et. Put the plug of the core temperature sensor as far as possible into the socket. It takes too long to cook the The temperature is too low dishes or they cook too or too high. quickly. Adjust the temperature if necessary. Follow the advice in the user manual. Steam and condensation You left the dish in the oven settle on the food and in the for too long. cavity of the oven. Do not leave the dishes in the oven for longer than 15 20 minutes after the cooking process ends. The display shows "C2". You want to start the Pyrolysis or Defrost function, but you did not remove the core temperature sensor plug from the socket. Remove the core temperature sensor plug from the socket. The display shows "C3". The cleaning function does not operate. You did not fully close the door, or the door lock is defective. Fully close the door. The display shows "F102". • You did not fully close the door. • The door lock is defective. • Fully close the door. • Deactivate the oven with the house fuse or the safety switch in the fuse box and activate it again. • If the display shows "F102" again, contact the Customer Care Department.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
Problem
Possible cause
Remedy
The oven does not heat up.
The Child Lock is on.
Refer to "Using the Child
Lock".
The oven does not heat up.
The fuse is blown.
Make sure that the fuse is
the cause of the malfunction.
If the fuse is blown again
and again, contact a quali-
fied electrician.
The lamp does not operate.
The lamp is defective.
Replace the lamp.
The display does not show
the time during the off sta-
tus.
The display is deactivated.
Touch
and
at the
same time to activate the
display again.
The core temperature sensor
does not operate.
The plug of the core tem-
perature sensor is not cor-
rectly installed into the sock-
et.
Put the plug of the core tem-
perature sensor as far as
possible into the socket.
It takes too long to cook the
dishes or they cook too
quickly.
The temperature is too low
or too high.
Adjust the temperature if
necessary. Follow the advice
in the user manual.
Steam and condensation
settle on the food and in the
cavity of the oven.
You left the dish in the oven
for too long.
Do not leave the dishes in
the oven for longer than 15 -
20 minutes after the cooking
process ends.
The display shows "C2".
You want to start the Pyroly-
sis or Defrost function, but
you did not remove the core
temperature sensor plug
from the socket.
Remove the core tempera-
ture sensor plug from the
socket.
The display shows "C3".
The cleaning function does
not operate. You did not
fully close the door, or the
door lock is defective.
Fully close the door.
The display shows "F102".
•
You did not fully close
the door.
•
The door lock is defec-
tive.
•
Fully close the door.
•
Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it again.
•
If the display shows
"F102" again, contact the
Customer Care Depart-
ment.
ENGLISH
39