AEG BPE642020M User Manual - Page 36

Pyrolysis, Cleaning reminder, Removing and installing, the door

Get AEG BPE642020M PDF manuals and user guides View all AEG BPE642020M manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

36 www.aeg.com 1 2 3. Activate the appliance. 4. Set the Pyrolysis function. Refer to "Oven functions". 5. Touch . 6. Touch or to set the duration of the cleaning procedure: Install the shelf supports in the opposite sequence. 12.3 Pyrolysis CAUTION! Remove all accessories and removable shelf supports. The pyrolytic cleaning procedure cannot start: • if you did not remove the core temperature sensor plug from the socket. In some models, the display shows "C2" when this error occurs. • if you did not fully close the oven door. In some models, the display shows "C3" when this error occurs. CAUTION! If there are other appliances installed in the same cabinet, do not use them at the same time as the Pyrolysis function. It can cause damage to the appliance. During the pyrolytic cleaning the door is locked. The symbol and the bars of the heat indicator come up, until the door unlocks. The door unlocks when the temperature inside the oven is under safety conditions and the pyrolytic cleaning finishes. During the pyrolytic cleaning the lamp is deactivated. 1. Remove the worst dirt manually. 2. Clean the inner side of the door with hot water, so that the residues do not burn from the hot air. Option 1 2 3 Description 1 h for a low degree of dirt 1 h 30 min for a usual degree of dirt 3 h for a high degree of dirt You can use the End function to delay the start of the cleaning procedure. 7. Touch to activate the Pyrolysis function. 12.4 Cleaning reminder To remind you that the pyrolytic cleaning is necessary, the cleaning reminder symbol flashes in the display after each deactivation of the appliance for the next 10 seconds. The cleaning reminder goes out: • after the end of the pyrolytic cleaning. • when you deactivate it in the basic settings. Refer to "Using the settings menu". 12.5 Removing and installing the door You can remove the door and the internal glass panels to clean it. The number of glass panels is different for different models. WARNING! Be careful when you remove the door from the appliance. The door is heavy.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
2
1
Install the shelf supports in the opposite
sequence.
12.3
Pyrolysis
CAUTION!
Remove all accessories and
removable shelf supports.
The pyrolytic cleaning
procedure cannot start:
•
if you did not remove the
core temperature sensor
plug from the socket. In
some models, the display
shows "C2" when this
error occurs.
•
if you did not fully close
the oven door. In some
models, the display
shows "C3" when this
error occurs.
CAUTION!
If there are other appliances
installed in the same
cabinet, do not use them at
the same time as the
Pyrolysis function. It can
cause damage to the
appliance.
During the pyrolytic cleaning the door is
locked. The symbol
and the bars of
the heat indicator come up, until the
door unlocks. The door unlocks when the
temperature inside the oven is under
safety conditions and the pyrolytic
cleaning finishes.
During the pyrolytic cleaning the lamp is
deactivated.
1.
Remove the worst dirt manually.
2.
Clean the inner side of the door with
hot water, so that the residues do not
burn from the hot air.
3.
Activate the appliance.
4.
Set the Pyrolysis function. Refer to
"Oven functions".
5.
Touch
.
6.
Touch
or
to set the duration
of the cleaning procedure:
Option
Description
1
1 h for a low
degree of dirt
2
1 h 30 min for
a usual de-
gree of dirt
3
3 h for a high
degree of dirt
You can use the End function to
delay the start of the cleaning
procedure.
7.
Touch
to activate the Pyrolysis
function.
12.4
Cleaning reminder
To remind you that the pyrolytic cleaning
is necessary, the cleaning reminder
symbol
flashes in the display after
each deactivation of the appliance for
the next 10 seconds.
The cleaning reminder
goes out:
•
after the end of the
pyrolytic cleaning.
•
when you deactivate it in
the basic settings. Refer
to "Using the settings
menu".
12.5
Removing and installing
the door
You can remove the door and the
internal glass panels to clean it. The
number of glass panels is different for
different models.
WARNING!
Be careful when you remove
the door from the appliance.
The door is heavy.
www.aeg.com
36