AEG BPE642020M User Manual - Page 20
Automatic Switch-off, Brightness of the display, Cooling fan
View all AEG BPE642020M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
20 www.aeg.com Description Value to set 4 KEY TONE1) CLICK / BEEP / OFF 5 FAULTY TONE ON / OFF 6 DEMO MODE Activation code: 2468 7 SERVICE MENU - 8 RESTORE SETTINGS YES / NO 1) It is not possible to deactivate the tone of the ON / OFF sensor field. 1. When the appliance is activated, touch then touch it again and hold for three seconds. The display shows SET1 and "1" flashes. 2. Touch or to set the setting. 3. Touch . 4. Touch or to change the value of the setting. 5. Touch . To exit the Settings menu, touch or touch and hold . 10.5 Automatic Switch-off For safety reasons the appliance deactivates automatically after some time if an oven function operates and you do not change any settings. Temperature (°C) 30 - 115 120 - 195 200 - 245 250 - maximum Switch-off time (h) 12.5 8.5 5.5 1.5 10.6 Brightness of the display There are two modes of display brightness: • Night brightness - when the appliance is deactivated, the brightness of the display is lower between 10 PM and 6 AM. • Day brightness: - when the appliance is activated. - if you touch a sensor field during the night brightness (apart from ON / OFF), the display goes back to the day brightness mode for the next 10 seconds. - if the appliance is deactivated and you set the Minute Minder. When the Minute Minder function ends, the display goes back to the night brightness. 10.7 Cooling fan When the appliance operates, the cooling fan activates automatically to keep the surfaces of the appliance cool. If you deactivate the appliance, the cooling fan can continue to operate until the appliance cools down. After the Automatic switch-off, touch a sensor field to operate the appliance again. The Automatic switch-off does not work with the functions: core temperature sensor, Light, Slow Cooking, Duration, End, Time delay.