AEG IKB64301XB User Manual - Page 11
OffSound Control, Deactivation and activation of, the sounds, Power management, Hob²Hood
View all AEG IKB64301XB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
ENGLISH 11 Touch for 4 seconds. comes on. Deactivate the hob with . To override the function for only one cooking time: activate the hob with . comes on. Touch for 4 seconds. Set the heat setting in 10 seconds. You can operate the hob. When you deactivate the hob with the function operates again. 4.11 OffSound Control (Deactivation and activation of the sounds) Originally the sounds are activated. • The function activates when the total electricity loading of the cooking zones connected to a single phase exceeds 3700 W. • The function decreases the power to the other cooking zones connected to the same phase. • The heat setting display of the reduced zones changes between two levels. Deactivate the hob. Touch for 3 seconds. The display comes on and goes out. Touch for 3 seconds. or comes on. Touch of the Timer to choose one of the following: • - the sounds are off • - the sounds are on To confirm your selection wait until the hob deactivates automatically. When the function is set to you can hear the sounds only when: • you touch • Minute Minder comes down • Count Down Timer comes down • you put something on the control panel. If there is a problem with electrical supply and the hob deactivates it does not keep previous settings. 4.12 Power management • Cooking zones are grouped according to the location and number of the phases in the hob. See the illustration. • Each phase has a maximum electricity loading of 3700 W. • The function divides the power between cooking zones connected to the same phase. 4.13 Hob²Hood It is an advanced automatic function which connects the hob to a special hood. Both the hob and the hood have an infrared signal communicator. Speed of the fan is defined automatically on basis of mode setting and temperature of the hottest cookware on the hob. You can also operate the fan from the hob manually. For most of the hoods the remote system is originally deactivated. Activate it before you use the function. For more information refer to hood user manual. Operating the function automatically To operate the function automatically set the automatic mode to H1 - H6. The hob is originally set to H5. The hood reacts whenever you operate the hob. The hob recognizes temperature of the cookware automatically and adjusts the speed of the fan.