AEG IKB64301XB User Manual - Page 16

16 www.aeg.com Problem Possible cause Remedy Pause operates. Refer to "Daily use". There is water or fat stains on the control panel. Clean the control panel. An acoustic signal sounds You put something on one and the hob deactivates. or more sensor fields. An acoustic signal sounds when the hob is deactivated. Remove the object from the sensor fields. The hob deactivates. You put something on the sensor field . Remove the object from the sensor field. Residual heat indicator does not come on. The zone is not hot because it operated only for a short time or the sensor is damaged. If the zone operated sufficiently long to be hot, speak to an Authorised Service Centre. Hob²Hood does not work. You covered the control panel. Remove the object from the control panel. Automatic Heat Up does not The zone is hot. operate. Let the zone become sufficiently cool. The highest heat setting is set. The highest heat setting has the same power as the function. The heat setting changes between two levels. Power management operates. Refer to "Daily use". The sensor fields become hot. The cookware is too large or Put large cookware on the you put it too near to the rear zones if possible. controls. There is no sound when you The sounds are deactivated. Activate the sounds. Refer to touch the panel sensor "Daily use". fields. comes on. Child Safety Device or Lock Refer to "Daily use". operates. comes on. There is no cookware on the Put cookware on the zone. zone. The cookware is unsuitable. Use suitable cookware. Refer to "Hints and tips". The diameter of the bottom Use cookware with correct of the cookware is too small dimensions. Refer to "Tech- for the zone. nical data".