AEG L7WEG841R User Manual - Page 28

Daily Use - Washing & Drying

Page 28 highlights

28 www.aeg.com • You do not use the appliance for 5 minutes before you touch the Start/ Pause button. Press the button On/Off to activate the appliance again. • After 5 minutes from the end of the washing programme Press the On/Off button to activate the appliance again. The display shows the end of the last set programme. Turn the programme dial to set a new cycle. If you set a programme or an option that ends with water in the drum, the Stand-by function doesn't deactivate the appliance to remind you to drain the water. 11. DAILY USE - WASHING & DRYING WARNING! Refer to Safety chapters. This appliance is an automatic washer dryer. 11.1 Complete wash&dry programmes Automatic Non-Stop programme The appliance is equipped with the NonStop 60min programme, an automatic wash&dry programme where it is not necessary to set the Dry mode. To run this programme: 1. After loading laundry and detergent, press the On/Off button for some seconds to activate the appliance. 2. Set the NonStop 60min programme by means of the programme dial. The indicator appears on the display 3. Touch the Start/Pause button to start the programme. Non-automatic wash&dry programmes In some washing programmes, you can combine Wash and Dry mode for running a complete wash&dry programme. Proceed as follows: 1. Press the On/Off button for some seconds to activate the appliance. 2. Load the laundry one item at a time. 3. Put the detergent and the additives in the appropriate compartment. 4. Turn the programme dial to the washing programme. The display shows the default temperature and spin. If necessary, change them according to your laundry. The display also shows the maximum recommended load for washing phase. 5. Set the desired options, if there are available. 6. Touch the Mode button once to activate also the drying function. The Wash and Dry indicators come on. The indicators and appear on the display. The display also shows the maximum recommended load for a washing and drying programme (e.g. 4 kg for cottons). 7. Now, you can choose an automatic drying level or a specific timed drying. 11.2 Washing and Drying Automatic levels 1. Tap on the Auto Drying button repeatedly until the display shows the required dryness level. The indicators in the display illuminate accordingly: a. items; Iron dry: for cotton b. Cupboard dry: for cotton and synthetic items;

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

You do not use the appliance for 5
minutes before you touch the Start/
Pause button.
Press the button On/Off to activate
the appliance again.
After 5 minutes from the end of the
washing programme
Press the On/Off button to activate
the appliance again.
The display shows the end of the last
set programme.
Turn the programme dial to set a new
cycle.
If you set a programme or an
option that ends with water
in the drum, the Stand-by
function
doesn't deactivate
the appliance to remind you
to drain the water.
11.
DAILY USE - WASHING & DRYING
WARNING!
Refer to Safety chapters.
This appliance is an
automatic washer dryer.
11.1
Complete wash&dry
programmes
Automatic Non-Stop
programme
The appliance is equipped with the
NonStop 60min programme, an
automatic wash&dry programme where it
is not necessary to set the Dry mode.
To run this programme:
1.
After loading laundry and detergent,
press the On/Off button for some
seconds to activate the appliance.
2.
Set the NonStop 60min programme
by means of the programme dial.
The indicator
appears on the display
3.
Touch the Start/Pause button to start
the programme.
Non-automatic wash&dry
programmes
In some washing programmes, you can
combine Wash and Dry mode for
running a complete wash&dry
programme.
Proceed as follows:
1.
Press the On/Off button for some
seconds to activate the appliance.
2.
Load the laundry one item at a time.
3.
Put the detergent and the additives
in the appropriate compartment.
4.
Turn the programme dial to the
washing programme. The display
shows the default temperature and
spin. If necessary, change them
according to your laundry. The
display also shows the maximum
recommended load for washing
phase.
5.
Set the desired options, if there are
available.
6.
Touch the Mode button once to
activate also the drying function. The
Wash and Dry indicators come on.
The indicators
and
appear on the display. The display
also shows the maximum
recommended load for a washing
and drying programme (e.g. 4 kg for
cottons).
7.
Now, you can choose an automatic
drying level or a specific timed
drying.
11.2
Washing and Drying -
Automatic levels
1.
Tap on the Auto Drying button
repeatedly until the display shows
the required dryness level. The
indicators in the display illuminate
accordingly:
a.
Iron dry
: for cotton
items;
b.
Cupboard dry
: for
cotton and synthetic items;
www.aeg.com
28