AEG L7WEG841R User Manual - Page 29

Daily Use - Drying Only

Page 29 highlights

ENGLISH 29 c. Extra dry: for cotton items. The time value on the display is the duration of both cycles washing and drying, calculated on a default load size. To have a good drying by using less energy and in a shorter time, the appliance does not let you set a too low spin speed for the items to be washed and dried. 2. Touch button Start/Pause to start the programme. The PROSENSE estimation starts. In the display the door locked indicator goes on, the indicator of the running phase starts flashing. The display also shows the remaining programme time. 11.3 Washing and Timed Drying 1. Tap on the button Time Drying repeatedly to set the desired time value (see the "Timed drying" table the "Programmes" chapter). The drying level indicator goes off and the indicator comes on. Each time you tap on this button the time value increases by 5 minutes. The display shows the set new time value. 2. Touch the Start/Pause to start the programme. The PROSENSE estimation starts. In the display the door locked indicator comes on and the indicator of the running phase starts flashing. The display also shows the remaining programme time. 11.4 At the end of the drying programme • The appliance stops automatically. • The acoustic signals operate (if they are active). • In the display comes on. • The indicator of button Start/Pause goes off. The door locked goes off • Press the button On/Off for some seconds to deactivate the appliance. After some minutes from the end of the programme, the energy saving function deactivates the appliance automatically. 1. Remove the laundry from the appliance. 2. Make sure that the drum is empty. After drying phase, clean the drum, the seal and the inside of the door with a wet cloth. 12. DAILY USE - DRYING ONLY WARNING! Refer to Safety chapters. This appliance is an automatic washer dryer. 12.1 Preparation to drying 1. Press the On/Off button for some seconds to activate the appliance. With a drying-only programme the display do not show the maximum load and the PROSENSE estimation is deactivated. 2. Load the laundry one item at a time. 3. Turn the programme dial to the programme suitable for the items to dry. 4. Tap on the Mode button twice to exclude washing and perform drying only. The Dry indicator is on. The indicators and the display. appear on

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

c.
Extra dry
: for cotton
items.
The time value on the display is the
duration of both cycles washing and
drying, calculated on a default load
size.
To have a good drying by
using less energy and in a
shorter time, the appliance
does not let you set a too
low spin speed for the items
to be washed and dried.
2.
Touch button Start/Pause to start the
programme. The PROSENSE
estimation starts.
In the display the door locked
indicator goes on, the indicator of the
running phase starts flashing.
The display also shows the remaining
programme time.
11.3
Washing and Timed
Drying
1.
Tap on the button Time Drying
repeatedly to set the desired time
value (see the "Timed drying" table
the "Programmes" chapter). The
drying level indicator goes off and
the indicator
comes on.
Each time you tap on this button the
time value increases by 5 minutes. The
display shows the set new time value.
2.
Touch the Start/Pause to start the
programme. The PROSENSE
estimation starts.
In the display the door locked
indicator comes on and the indicator of
the running phase starts flashing.
The display also shows the remaining
programme time.
11.4
At the end of the drying
programme
The appliance stops automatically.
The acoustic signals operate (if they
are active).
In the display
comes on.
The indicator of button Start/Pause
goes off. The door locked
goes
off
Press the button On/Off for some
seconds to deactivate the appliance.
After some minutes from
the end of the
programme, the energy
saving function
deactivates the appliance
automatically.
1.
Remove the laundry from the
appliance.
2.
Make sure that the drum is empty.
After drying phase, clean the
drum, the seal and the inside
of the door with a wet cloth.
12.
DAILY USE - DRYING ONLY
WARNING!
Refer to Safety chapters.
This appliance is an
automatic washer dryer.
12.1
Preparation to drying
1.
Press the On/Off button for some
seconds to activate the appliance.
With a drying-only
programme the display do
not show the maximum load
and the PROSENSE
estimation is deactivated.
2.
Load the laundry one item at a time.
3.
Turn the programme dial to the
programme suitable for the items to
dry.
4.
Tap on the Mode button twice to
exclude washing and perform drying
only. The Dry indicator is on. The
indicators
and
appear on
the display.
ENGLISH
29