AEG L88409FL2 Product Manual - Page 11
Stain-Prewash button, Spin button, Temperature button, Acoustic signals function, Child lock
View all AEG L88409FL2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
4.8 Stain-Prewash button 8 Press button 8 to add the stain and/or a prewash phase to a programme. Press the button again and again to activate one or two options. The related symbol and the indicator bar comes on in the display. STAIN • Use this function for laundry with hard stains to remove. When you set this function, put the stain remover into compartment . This function increases the programme duration. This function is not available with a temperature lower than 40° C. PREWASH • Use this function to add a prewash phase before the washing phase. We recommend that you use this function when you have laundry with a high level of soil. The set of this function increases the programme duration. 4.9 Spin button 9 Press this button to: • Decrease the maximum speed of the spin phase of the programme. The display shows only the spin speeds available with the set programme. • Deactivate the spin phase. • Activate the 'Rinse Hold' function. Set this function to prevent fabric creases. The appliance does not drain the water when the programme is completed. 4.10 Temperature button 10 Press button 10 to change the default temperature. When the display shows - -, the appliance does not heat the water. ENGLISH 11 4.11 Acoustic signals function You can hear the acoustic signals when: • You activate the appliance. • You deactivate the appliance. • You press the buttons. • The programme is completed. • The appliance has a malfunction. To deactivate/activate the acoustic signals, press button 8 and button 7 at the same time for 6 seconds. If you deactivate the acoustic signals, they continue operate only when you press the buttons and when a malfunction occurs. 4.12 Child lock function This function prevents children to play with the control panel. • To activate the function, press button 10 and button 9 at the same time until the display shows the symbol . • To deactivate the function, press button 10 and button 9 at the same time until the symbol goes off. You can activate the function: • Before you press the Start/Pause button 4 : the appliance cannot start. • After you press the Start/Pause button 4 , all the buttons and the programme knob are deactivated. 4.13 Permanent extra rinse function With this function you can keep the extra rinse function permanently on when you set a new programme. • To activate the function press button 6 and button 5 at the same time until the display shows the symbol . • To deactivate the function press button 6 and button 5 at the same time until the symbol goes off.