AEG L88409FL2 Product Manual - Page 28
Technical Information
View all AEG L88409FL2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
28 www.aeg.com After the check, activate the appliance. The programme continues from the point of interruption. If the problem occurs again, contact the service centre. If the display shows other alarm codes, contact the service centre. 12. TECHNICAL INFORMATION Dimensions Width / Height / Depth 600 / 850 / 605 mm Total depth 640 mm Electrical connection: Voltage Overall power Fuse Frequency 220-230 V 2200 W 13 A 50 Hz Level of protection against ingress of solid particles and moisture ensured by the protective cover, except where the low voltage equipment has no protection against moisture IPX4 Water supply pressure1) Minimum Maximum 0,5 bar (0,05 MPa) 8 bar (0,8 MPa) Water supply 2) Cold water Maximum load Cotton 10 kg Spin speed Maximum 1400 rpm 1) The appliance works correctly if the water pressure is not less than 0.05 MPa (0.5 bar). If you can not connect the water inlet hose to the cold water tap of the primary hydraulic system, connect it to your domestic cold water storage system. Make sure not to have more than a distance of 5.02 m (16.5 ft) between the appliance inlet hose and the bottom of the water storage tank. 2) Connect the water inlet hose to a water tap with a 3/4'' thread. 13. ENVIRONMENT CONCERNS Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it. Help protect the environment and human health and to recycle waste of electrical and electronic appliances. Do not dispose appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.