AEG SCE819E5TS User Manual - Page 12

Daily Use

Page 12 highlights

12 www.aeg.com 4.12 DrinksChill function The DrinksChill function is to be used to set an acoustic alarm at the preferred time, useful for example when a recipe requires to cool down food products for a certain period of time. It is also useful when a reminder is needed in order not to forget the bottles or cans placed in the freezer for fast cooling. 1. Press Mode until the corresponding icon appears. The DrinksChill indicator flashes. The Timer shows the set value (30 minutes) for a few seconds. 2. Press the Timer regulator to change the Timer set value from 1 to 90 minutes. 3. Press OK to confirm. The DrinksChill indicator is shown. The Timer starts to flash (min). At the end of the countdown the "0 min" indicator flashes and an audible alarm sounds. Press OK to switch off the sound and terminate the function. To switch off the function repeat the procedure until the DrinksChill goes off. It is possible to change the time at any time during the countdown and at the end by pressing the Temperature colder button and the Temperature warmer button. 4.13 High temperature alarm When there is a temperature increase in the freezer compartment (for example 5. DAILY USE due to an earlier power failure), the alarm and freezer temperature indicators flash and the sound is on. To deactivate the alarm: 1. Press any button. The sound switches off. 2. The freezer temperature indicator shows the highest temperature reached for a few seconds, then the display shows the set temperature again. The alarm indicator continues to flash until the normal conditions are restored. If you do not press any button, the sound switches off automatically after around one hour to avoid disturbing. 4.14 Door open alarm If the fridge door is left open for approximately 5 minutes, the sound is on and alarm indicator flashes. The alarm stops after closing the door. During the alarm, the sound can be muted by pressing any button. If you do not press any button, the sound switches off automatically after around one hour to avoid disturbing. 5.1 Positioning door shelves The door of this appliance is equipped with runners that enable shelves/bins to be arranged according to individual preferences. To reposition the door shelves/bins: 1. Gradually lift the shelf/bin in the direction of the arrows until it comes free. 2. Place the shelf/bin in desired position and gently insert it into the runner.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

4.12 DrinksChill function
The DrinksChill function is to be used to
set an acoustic alarm at the preferred
time, useful for example when a recipe
requires to cool down food products for a
certain period of time.
It is also useful when a reminder is
needed in order not to forget the bottles
or cans placed in the freezer for fast
cooling.
1.
Press Mode until the corresponding
icon appears.
The DrinksChill indicator flashes.
The Timer shows the set value (30
minutes) for a few seconds.
2.
Press the Timer regulator to change
the Timer set value from 1 to 90
minutes.
3.
Press OK to confirm.
The DrinksChill indicator is shown.
The Timer starts to flash (min).
At the end of the countdown the "0 min"
indicator flashes and an audible alarm
sounds. Press OK to switch off the sound
and terminate the function.
To switch off the function repeat the
procedure until the DrinksChill goes off.
It is possible to change the
time at any time during the
countdown and at the end by
pressing the Temperature
colder button and the
Temperature warmer button.
4.13 High temperature alarm
When there is a temperature increase in
the freezer compartment (for example
due to an earlier power failure), the alarm
and freezer temperature indicators flash
and the sound is on.
To deactivate the alarm:
1.
Press any button.
The sound switches off.
2.
The freezer temperature indicator
shows the highest temperature
reached for a few seconds, then the
display shows the set temperature
again.
The alarm indicator
continues to flash until the
normal conditions are
restored.
If you do not press any
button, the sound switches
off automatically after
around one hour to avoid
disturbing.
4.14 Door open alarm
If the fridge door is left open for
approximately 5 minutes, the sound is on
and alarm indicator flashes.
The alarm stops after closing the door.
During the alarm, the sound can be
muted by pressing any button.
If you do not press any
button, the sound switches
off automatically after
around one hour to avoid
disturbing.
5. DAILY USE
5.1 Positioning door shelves
The door of this appliance is equipped
with runners that enable shelves/bins to
be arranged according to individual
preferences.
To reposition the door shelves/bins:
1.
Gradually lift the shelf/bin in the
direction of the arrows until it comes
free.
2.
Place the shelf/bin in desired position
and gently insert it into the runner.
www.aeg.com
12