AEG SCE819E5TS User Manual - Page 19
Refer to Door Open Alarm
View all AEG SCE819E5TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
ENGLISH 19 Problem Possible cause Solution There is no voltage in the mains socket. Connect a different electrical appliance to the mains sock‐ et. Contact a qualified elec‐ trician. The appliance is noisy. The appliance is not suppor‐ Check if the appliance ted properly. stands stable. Acoustic or visual alarm is on. The cabinet has been re‐ cently switched on. Refer to "Door Open Alarm" or "High Temperature Alarm". The temperature in the appli‐ Refer to "Door Open Alarm" ance is too high. or "High Temperature Alarm". The door is left open. Close the door. The compressor operates continually. Temperature is set incorrect‐ Refer to "Control Panel" ly. chapter. Many food products were put in at the same time. Wait a few hours and then check the temperature again. The room temperature is too Refer to "Installation" chap‐ high. ter. Food products placed in the Allow food products to cool appliance were too warm. to room temperature before storing. The door is not closed cor‐ Refer to "Closing the door" rectly. section. The Frostmatic function is switched on. Refer to "Frostmatic func‐ tion" section. The Coolmatic function is switched on. Refer to "Coolmatic function" section. The compressor does not start immediately after pressing the "Frostmatic" or "Coolmatic", or after chang‐ ing the temperature. The compressor starts after a period of time. This is normal, no error has occurred. Door is misaligned or inter‐ The appliance is not level‐ feres with ventilation grill. led. Refer to installation instruc‐ tions. Door does not open easily. You attempted to re-open the door immediately after closing. Wait a few seconds between closing and re-opening of the door.