AEG SCE819E5TS User Manual - Page 21

ENGLISH 21 Problem Possible cause Solution Temperature cannot be set. The "Frostmatic function" or "Coolmatic function" is switched on. Switch off "Frostmatic func‐ tion" or "Coolmatic function" manually, or wait until the function deactivates auto‐ matically to set the tempera‐ ture. Refer to "Frostmatic function" or "Coolmatic func‐ tion" section. The temperature in the appli‐ The temperature is not set Set a higher/lower tempera‐ ance is too low/too high. correctly. ture. The door is not closed cor‐ Refer to "Closing the door" rectly. section. The food products' tempera‐ Let the food products tem‐ ture is too high. perature decrease to room temperature before storage. Many food products are stor‐ Store less food products at ed at the same time. the same time. The door has been opened Open the door only if neces‐ often. sary. The Frostmatic function is switched on. Refer to "Frostmatic func‐ tion" section. The Coolmatic function is switched on. Refer to "Coolmatic function" section. There is no cold air circula‐ tion in the appliance. Make sure that there is cold air circulation in the appli‐ ance. Refer to "Hints and Tips" chapter. DEMO appears on the dis‐ play. The appliance is in demon‐ stration mode. Keep the OK key pressed for approximately 10 seconds until a long sound is heard and the display turns off for a short time. A or or symbol is shown instead of numbers on the temperature display. Temperature sensor prob‐ lem. Contact the nearest Author‐ ized Service Centre (the cooling system will continue to keep food products cold, but temperature adjustment will not be possible). If the advice does not lead to the desired result, call the nearest Authorized Service Centre. 8.2 Replacing the lamp The appliance is equipped with a longlife LED interior light.