AEG Sensorlogic Freestanding 60cm Dishwasher Stainless Steel F56302M0 Product - Page 10

Page 10 highlights

10 www.aeg.com • The indicator continues to flash. • The display shows the current setting. - = rinse aid empty notification activated. - = rinse aid empty notification deactivated. 3. Press Option to change the setting. 4. Press the on/off button to confirm the setting. 6.4 Acoustic signals Acoustic signals sound when a malfunction of the appliance occurs. It is not possible to deactivate these acoustic signals. There is also an acoustic signal that sounds when the programme is completed. By default this acoustic signal is deactivated but it is possible to activate it. How to activate the acoustic signal for the end of programme The appliance must be in programme selection mode. 7. OPTIONS Desired options must be activated every time before you start a programme. It is not possible to activate or deactivate options while a programme is running. Not all options are compatible with each other. If you have selected non compatible options, the appliance will automatically deactivate one or more of them. Only the indicators of the options still active will stay on. 1. To enter the user mode press and hold simultaneously Delay and Start until the indicators , and start to flash and the display is blank. 2. Press Delay • The indicators and go off. • The indicator continues to flash. • The display shows the current setting: - = Acoustic signal off. - = Acoustic signal on. 3. Press Delay to change the setting. 4. Press the on/off button to confirm the setting. 7.1 ExtraHygiene With this option you have better hygiene results. During the last rinsing phase, the temperature stays at 70 °C for at least 10 minutes. How to activate ExtraHygiene Press Option until the indicator comes on. If the option is not applicable to the programme, the related indicator does not come on or it flashes quickly for a few seconds and then goes off. The display shows the updated programme duration.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
•
The indicator
continues to flash.
•
The display shows the current
setting.
–
= rinse aid empty
notification activated.
–
= rinse aid empty
notification deactivated.
3.
Press
Option
to change the setting.
4.
Press the on/off button to confirm
the setting.
6.4
Acoustic signals
Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic
signal is deactivated but it is possible to
activate it.
How to activate the acoustic
signal for the end of
programme
The appliance must be in programme
selection mode.
1.
To enter the user mode press and
hold simultaneously
Delay
and
Start
until the indicators
,
and
start to flash
and the display is blank.
2.
Press
Delay
•
The indicators
and
go off.
•
The indicator
continues to
flash.
•
The display shows the current
setting:
–
= Acoustic signal off.
–
= Acoustic signal on.
3.
Press
Delay
to change the setting.
4.
Press the on/off button to confirm
the setting.
7.
OPTIONS
Desired options must be
activated every time before
you start a programme.
It is not possible to activate
or deactivate options while a
programme is running.
Not all options are
compatible with each other.
If you have selected non
compatible options, the
appliance will automatically
deactivate one or more of
them. Only the indicators of
the options still active will
stay on.
7.1
ExtraHygiene
With this option you have better hygiene
results. During the last rinsing phase, the
temperature stays at 70 °C for at least 10
minutes.
How to activate ExtraHygiene
Press
Option
until the indicator
comes on.
If the option is not applicable to the
programme, the related indicator does
not come on or it flashes quickly for a
few seconds and then goes off.
The display shows the updated
programme duration.
www.aeg.com
10