AEG Sensorlogic Freestanding 60cm Dishwasher Stainless Steel F56302M0 Product - Page 13

A BD 30 20 C 1. Press the release button (B) to open the lid (C). 2. Put the detergent, in powder or tablets, in the compartment (A). 3. If the programme has a prewash phase, put a small quantity of detergent in the compartment (D). 4. Close the lid. Make sure that the release button locks into position. 9.2 Setting and starting a programme The Auto Off function This function decreases energy consumption by deactivating automatically the appliance when it is not operating. The function comes into operation: • 5 minutes after the completion of the programme. • After 5 minutes if the programme has not started. Starting a programme 1. Press the on/off button to activate the appliance. Make sure that the appliance is in programme selection mode. 2. Close the appliance door. 3. Press Program again and again until the indicator of the programme you want to select comes on. The display shows the programme duration. 4. Set the applicable options. 5. Press Start to start the programme. • The washing phase indicator comes on . ENGLISH 13 • The programme duration starts to decrease with steps of 1 minute. Starting a programme with delay start 1. Set a programme. 2. Press Delay again and again until the display shows the delay time you want to set (from 1 to 24 hours). The indicator of the selected programme flashes. 3. Press Start. 4. Close the appliance door to start the countdown. When the countdown is completed, the programme starts and the washing phase indicator comes on. Opening the door while the appliance operates If you open the door while a programme is running, the appliance stops. It may affect the energy consumption and the programme duration. When you close the door, the appliance continues from the point of interruption. If the door is opened for more than 30 seconds during the drying phase, the running programme will end. Cancelling the delay start while the countdown operates When you cancel the delay start you have to set the programme and options again. Press and hold simultaneously Program and Option until the appliance is in programme selection mode. Cancelling the programme Press and hold simultaneously Program and Option until the appliance is in programme selection mode. Make sure that there is detergent in the detergent dispenser before you start a new programme.