AEG Sensorlogic Freestanding 60cm Dishwasher Stainless Steel F56302M0 Product - Page 12

Page 12 highlights

12 www.aeg.com 8.2 How to fill the rinse aid dispenser AD B C A B M AX 32 4 1 + - CAUTION! Only use rinse aid specifically designed for dishwashers. 1. Press the release button (D) to open the lid (C). 2. Pour the rinse aid in the dispenser (A) until the liquid reaches the fill level 'max'. 3. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam. 4. Close the lid. Make sure that the release button locks into position. You can turn the selector of the released quantity (B) between position 1 (lowest quantity) and position 4 or 6 (highest quantity). C D 9. DAILY USE 1. Open the water tap. 2. Press the on/off button to activate the appliance. Make sure that the appliance is in programme selection mode. • If the salt indicator is on, fill the salt container. • If the rinse aid indicator is on, fill the rinse aid dispenser. 3. Load the baskets. 4. Add the detergent. 5. Set and start the correct programme for the type of load and the degree of soil. 9.1 Using the detergent DA B 30 20 C

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
8.2
How to fill the rinse aid
dispenser
A
B
D
C
M
A
X
1
2
3
4
+
-
A
B
D
C
CAUTION!
Only use rinse aid
specifically designed for
dishwashers.
1.
Press the release button (
D
) to open
the lid (
C
).
2.
Pour the rinse aid in the dispenser (
A
)
until the liquid reaches the fill level
'max'.
3.
Remove the spilled rinse aid with an
absorbent cloth to prevent too much
foam.
4.
Close the lid. Make sure that the
release button locks into position.
You can turn the selector of
the released quantity (
B
)
between position 1 (lowest
quantity) and position 4 or 6
(highest quantity).
9.
DAILY USE
1.
Open the water tap.
2.
Press the on/off button to activate
the appliance.
Make sure that the appliance is in
programme selection mode.
•
If the salt indicator is on, fill the
salt container.
•
If the rinse aid indicator is on, fill
the rinse aid dispenser.
3.
Load the baskets.
4.
Add the detergent.
5.
Set and start the correct programme
for the type of load and the degree
of soil.
9.1
Using the detergent
30
20
A
B
D
C
www.aeg.com
12