AEG T65170AV Product Manual - Page 14
At The End Of Programme - not heating
View all AEG T65170AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
14 THE DELICATE FUNCTION STARTING A PROGRAMME To dry more lightly the sensitive and temperature sensitive textiles (e.g. acrylic, viscose). For fabrics with the symbol on the fabric label. Programme operates with decreased heat. THE SENSITIVE FUNCTION To dry lightly of fabrics that are frequently worn. Programme starts on full heat setting, which is then decrease as the programme continue to be lightly to the laundry. THE ANTICREASE FUNCTION Extends anticrease phase (30 minutes) at the end of the drying cycle to 90 minutes. This function prevents laundry from creases. Laundry can be removed during the anticrease phase. THE BUZZER FUNCTION When the buzzer function is activated you can hear the buzzer at the: • cycle end • anti-crease phase start and end • cycle interruption The buzzer function is by default always on. You can use this function to activate or deactivate the sound. THE DELAY START FUNCTION Let to delay the start of a drying programme by 3, 6 or 9 hours. 1. Set the drying programme and functions. 2. Push the Delay start button as many times as necessary. 3. To activate the Delay start function, push the Start/Pause button. The LEDs (9H, 6H, 3H) change on each 3 hours. To activate the programme push the Start/Pause button. The LED above the push button changes the colour to red. CHANGE A PROGRAMME To change a programme, turn the programme dial to (off) and then set the programme again. AT THE END OF PROGRAMME When the drying cycle is complete, LEDs End and Filter are on . If the Buzzer function is on, an acoustic signal sounds intermittently for about one minute. The drying cycles (except for the Wool care programme) are automatically followed by an anticrease phase which continue around 30 minutes. The laundry can be removed during the anticrease phase (The laundry should be taken out towards the end of the anti-crease phase at the latest to prevent creases from forming.) . If Anticrease function is set, the anti-crease phase is increased by 60 minutes. To remove the laundry: 1. Turn the programme dial to (off) 2. Open the appliance door. 3. Remove the laundry. 4. Close the appliance door. After each drying cycle: clean the filter (See chapter CARE AND CLEANING.)