AEG T7DBK841N User Manual - Page 18

18 www.aeg.com 5. Touch the Start/Pause button repeatedly until you reach the desired dryness level. Dryness level Display symbol Maximum dryness Extra dryness Standard dryness 6. To memorise the setting touch and hold down the Anticrease and Time Drying buttons at the same time for approximately 2 seconds. 9.3 Deactivating the tank indicator The water container indicator is activated by default. It illuminates at the end of the 10. CARE AND CLEANING 10.1 Cleaning the filter At the end of each cycle the Filter symbol comes on the display and you must clean the filter. The filter collects the lint during the drying cycle. To achieve the best drying performances clean the filter regularly , clogged filter lead to longer cycles and energy consumption increase. Use your hand to clean the filter , and if necessary , a vacuum cleaner . CAUTION! Avoid the use of water to clean the filter. Instead throw away lint in the dustbin ( avoid dispersion of plastic fiber in water ambient). drying cycle or during the cycle if the water reservoir is full. If the draining kit is installed the water container is drained automatically and the indicator can be deactivated. To deactivate the indicator: 1. Turn the appliance on. 2. Wait approximately 8 seconds. 3. Select 1 of the available programmes. 4. Touch and hold down End alert and Time Drying buttons at the same time. One of 2 configurations is possible: • the Tank indicator: is on if the symbol appears - the water container indicator is permanently activated • the Tank indicator: is off if the symbol appears - the water container indicator is permanently deactivated 1. Open the door. Pull the filter up. 2. Push the hook to open the filter.