AEG T7DBK841N User Manual - Page 20
Cleaning the humidity, sensor, Cleaning the drum
View all AEG T7DBK841N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
20 www.aeg.com 2. Open the condenser cover. 3. Turn the lever to unlock the condenser lid. 4. Lower the condenser lid. 6. Close the condenser lid. 7. Turn the lever until it clicks into position. 8. Put the filter back. 10.4 Cleaning the humidity sensor CAUTION! Risk of humidity sensor damage. Do not use abrasive materials or steel wool to clean the sensor. To assure best drying results the appliance is equipped with metal humidity sensor. It is placed on the inner side of the door area. Over usage time the surface of the sensor may get dirty what deteriorates the drying performance. We recommend to clean the sensor at least 3 or 4 times or if you observe the drop of drying performance. To clean you can use harder side of dishwashing sponge and bit of vinegar or dish soap. To clean the sensor: 1. Open the loading door. 2. Clean the surfaces of the humidity sensor wiping off the metal surface several times. 5. If necessary, remove the fluff from the condenser and its compartment. You can use a wet cloth and/or a vacuum cleaner with a brush attachment. 10.5 Cleaning the drum WARNING! Disconnect the appliance before you clean it. Use a standard neutral soap detergent to clean the inner surface of the drum and drum lifters. Dry the cleaned surfaces with a soft cloth.