AEG T7DBK841N User Manual - Page 21

Troubleshooting

Get AEG T7DBK841N PDF manuals and user guides View all AEG T7DBK841N manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

ENGLISH 21 CAUTION! Do not use abrasive materials or steel wool to clean the drum. 10.6 Cleaning the control panel and housing Use a standard neutral soap detergent to clean the control panel and housing. Use a moist cloth to clean. Dry the cleaned surfaces with a soft cloth. 11. TROUBLESHOOTING CAUTION! Do not use furniture cleaning agents or cleaning agents which can cause corrosion. 10.7 Cleaning the airflow slots Use a vacuum cleaner to remove fluff from the airflow slots. Problem 1) Possible cause Remedy The tumble dryer is not connected Connect it to the mains socket. to the mains supply. Check the fuse in the fuse box (do- mestic installation). The tumble dryer does not operate. The door is open. The On/Off button was not pushed. Close the door. Push the On/Off button. The Start/Pause button was not touched. Touch the Start/Pause button. The appliance is in standby mode. Push the On/Off button. Incorrect programme selection. Select a suitable programme. 2) The filter is clogged. Clean the filter. 3) Dryness option was set to Dry.4) Iron Change Dryness option to a higher level. Unsatisfactory drying result. The load was too large. The airflow slots are clogged. Do not exceed the maximum load size. Clean the airflow slots at the bottom of the appliance. There is some dirt on the humidity Clean the front surface of the sensor in the drum. drum. The dryness level was not set to the desired level. Adjust the dryness level. 5) The condenser is clogged. Clean the condenser. 3)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
CAUTION!
Do not use abrasive
materials or steel wool to
clean the drum.
10.6
Cleaning the control
panel and housing
Use a standard neutral soap detergent to
clean the control panel and housing.
Use a moist cloth to clean. Dry the
cleaned surfaces with a soft cloth.
CAUTION!
Do not use furniture
cleaning agents or cleaning
agents which can cause
corrosion.
10.7
Cleaning the airflow slots
Use a vacuum cleaner to remove fluff
from the airflow slots.
11.
TROUBLESHOOTING
Problem
1)
Possible cause
Remedy
The tumble dry-
er does not op-
erate.
The tumble dryer is not connected
to the mains supply.
Connect it to the mains socket.
Check the fuse in the fuse box (do-
mestic installation).
The door is open.
Close the door.
The On/Off button was not push-
ed.
Push the On/Off button.
The Start/Pause button was not
touched.
Touch the Start/Pause button.
The appliance is in standby mode.
Push the On/Off button.
Unsatisfactory
drying result.
Incorrect programme selection.
Select a suitable programme.
2)
The filter is clogged.
Clean the filter.
3)
Dryness option was set to
Iron
Dry
.
4)
Change Dryness option to a higher
level.
The load was too large.
Do not exceed the maximum load
size.
The airflow slots are clogged.
Clean the airflow slots at the bot-
tom of the appliance.
There is some dirt on the humidity
sensor in the drum.
Clean the front surface of the
drum.
The dryness level was not set to
the desired level.
Adjust the dryness level.
5)
The condenser is clogged.
Clean the condenser.
3)
ENGLISH
21